Skip to content
New Pitts lowboy trailer, seen from the rear, at TM Trailer Sales in Jackson, GA
  1. Home
  2. Brands
  3. Pitts
Pitts heavy-haul and log trailers

Pitts

Pitts Heavy Haul builds hydraulic detachable and fixed neck lowboys, tag trailers, flip axles, spreaders and a jeep.

79 models, 7 to 60 ton

Factory literature on this site
  • Spec sheets for 21 models
  • Brochures for 43 models
  • 2 videos
See the files
More about this line

The Pitts line also covers Forestry log trailers, knuckle boom loader trailers, steel drop decks and flatbeds, equipment trailers and intermodal chassis.

Factory: Pittsview, AL

About Pitts

Pitts builds heavy-haul lowboys, log trailers and flip-axle add-ons in Pittsview, Alabama. The factory site says "Since 1976."

From Pitts's website.

Listed now

Hydraulic Detachable Trailers

Lowboy, hydraulic detachable gooseneck (non-ground-bearing)

Pitts Heavy Haul hydraulic detachables run from 35 to 60 tons with 18 in or 22 in loaded deck heights.

Read more

DC models are level-deck detachables with a 4-position ride height and a 25 ft deck. GT models are built for add-ons: a gooseneck reinforced for an extension, 5-position ride height, recessed load-bearing bolsters, and mounts for a hydraulic spreader or flip axle. The 55 ton GT has a low profile cantilever neck that extends 45 in above the deck. Pitts calls the 2023 GT detachable the Contender GT and the 40 ton GT the Contender GT40. DPS Paver Special models add a tapered neck and main beams, paver-style front flip ramps and an 18 degree wood paver slope at the rear.

Hydraulic Detachable Trailers models
ModelCapacityDeckKey specs
LB35-18DC35 ton25 ftLoaded deck height 18 in with 6 in ground clearance
LB35-22DC35 ton25 ftLoaded deck height 22 in with 6 in ground clearance
LB35-22DPS35 ton24 ftLoaded deck height 22 in with 6 in ground clearance
LB40-18GT40 ton34 ftLoaded deck height 18 in with 6 in ground clearance
LB40-22GT40 ton34 ftRated 80,000 lb in any 12 ft
LB51-18DC51 ton25 ftLoaded deck height 18 in with 6 in ground clearance
LB51-22DC51 ton25 ftLoaded deck height 22 in with 6 in ground clearance
LB51-22DPS51 ton24 ftLoaded deck height 22 in with 6 in ground clearance
LB55-18DC55 ton25 ft 4 inLoaded deck height 18 in with 6 in ground clearance
LB55-18GT55 ton26 ftLoaded deck height 18 in with 6 in ground clearance
LB55-22 GT-DPS55 ton24 ftLoaded deck height 22 in with 6 in ground clearance
LB55-22DC55 ton25 ftLoaded deck height 22 in with 6 in ground clearance
LB55-22DPS55 ton24 ftLoaded deck height 22 in with 6 in ground clearance
LB55-22GT55 ton26 ftLoaded deck height 22 in with 6 in ground clearance
LB60-18GT60 ton26 ftLoaded deck height 18 in with 6 in ground clearance
LB60-22DC60 ton25 ftLoaded deck height 22 in with 6 in ground clearance
LB60-22GT60 ton26 ftLoaded deck height 22 in with 6 in ground clearance
Hydraulic Detachable Trailers options5
  • Gooseneck extension

    2 ft or 4 ft gooseneck extension on GT models. Adds 2 ft or 4 ft to overall length when used.

  • Pony motor

    11.7 HP Honda pony motor with auto choke and throttle

  • Over-width deck

    9 ft or 10 ft wide deck

  • Front flip ramps

    18 in x 31 in steel front flip ramps with traction bars (adds 6 in of swing clearance)

  • Dovetail

    3 ft or 4 ft dovetail, steel with check plate and traction bars or wood filled

Fixed Neck Trailers

Lowboy, fixed neck

Pitts fixed neck lowboys run from 25 to 51 tons with 26 in, 33 in or 38 in loaded deck heights.

Read more

The standard build has an exposed neck with steel motor grader ramps and a loading slope, and a flat deck with a dovetail and ramp off the rear. CS models add a full-width top deck with a sloped steel transition and Apitong decking. The LB35-33BT adds a beavertail and ramp off the rear.

Fixed Neck Trailers models
ModelCapacityDeckKey specs
LB25-3325 ton25 ftLoaded deck height 33 in with 16 in ground clearance
LB25-33CS25 ton29 ftLoaded deck height 33 in with 16 in ground clearance
LB35-2635 ton20 ftLoaded deck height 26 in with 12 in ground clearance
LB35-3335 ton26 ftLoaded deck height 33 in with 17 in ground clearance
LB35-33BT35 ton20 ft2 axles, 25,000 lb capacity each
LB35-33CS35 ton26 ftLoaded deck height 33 in with 17 in ground clearance
LB35-3835 ton26 ftLoaded deck height 38 in with 20 in ground clearance
LB35-38CS35 ton26 ftLoaded deck height 38 in with 20 in ground clearance
LB51-2651 ton20 ftLoaded deck height 26 in with 12 in ground clearance
LB51-3351 ton30 ftLoaded deck height 33 in with 15 in ground clearance
LB51-33CS51 ton30 ftLoaded deck height 33 in with 15 in ground clearance
LB51-3851 ton30 ftLoaded deck height 38 in with 20 in ground clearance
LB51-38CS51 ton30 ftLoaded deck height 38 in with 20 in ground clearance
Fixed Neck Trailers options5
  • Hydraulic rear ramps

    96 in x 36 in hydraulic rear ramps, wood filled or self-cleaning. Self-contained electric over hydraulic pump.

  • Air ride

    Air ride suspension with a 35 in loaded deck height. Not offered on the LB25 models.

  • Over-width deck

    9 ft or 10 ft wide deck, or 12 in brackets that extend deck width 2 ft

  • Longer deck

    31 ft or 32 ft deck

  • Winches and outriggers

    Electric or hydraulic winches and outriggers

Flip Axle

Bolt-on flip axles for Pitts detachables: a single 25,000 lb air ride axle.

Read more

Each flip axle is designed for specific Pitts models only, not as a universal add-on.

Hydraulic Spreader Bar

Add-on, hydraulic spread axle

Hydraulic spread axle add-ons for Pitts detachables. The HSB2-141 is a two-axle set-up that requires the FM25 and FA25 axles and is for LB60GT models.

Jeep

A two-axle jeep designed to couple with the Pitts LB60GT.

  • JP4040 ton, 28 ft long

Tag Trailers

Tag trailer (pintle hitch)

Pitts tag trailers run from 10 to 30 tons, including the TA20-T tilt tag. The number in a TA model is its rated tons.

  • TA1010 ton, 19 ft deck
  • TA1212 ton, 19 ft deck
  • TA1515 ton, 21 ft deck
  • TA2020 ton, 21 ft deck
  • TA20-T20 ton, 24 ft deck
  • TA20G20 ton, 32 ft 6 in overall
  • TA2525 ton, 24 ft deck
  • TA3030 ton, 24 ft deck
Tag Trailers options3

Air ride; Hydraulic rear ramps; Outer Aluminum Wheels

Log Trailers

Log trailer

The Pitts Forestry LT40 family (straight frame or 8 in center drop) and the LP40 Plantation family (fabricated beam, with or without a 4 in center drop) are 40 ft log trailers.

Read more

The PT22 is a pintle hitch pup. UL models use Raptor ultra-light bolsters. Standard log trailers use the patented Lock N'Go double-locking landing gear. In LT and LP model names the number is the length in feet, not a capacity.

Log Trailers options8

Axle and suspension choices; Two-speed landing gear; Longer frame; Disc brakes; Grapple deflector; Heavy duty bumper; Removable headboard; LED underglow and bolster lights

Loader Trailers

Knuckle boom loader trailer

Knuckle boom loader trailers. The KB-S has standard landing gear.

Read more

The KB-DHL is hydraulic elevating and delimber capable.

Drop Deck

Drop deck (step deck), steel

Pitts Platform steel drop decks with an 80,000 lb beam package, air ride spread axles, and 36 in or 41 in deck heights.

Read more

BTR models add a beavertail and ramps and run 53 ft overall instead of 48 ft.

Drop Deck options1

53 ft length

Drop Deck Flatbed

Drop deck (step deck), steel

The DF55-41 is a steel drop deck with a 110,000 lb beam package, a 41 in deck height and air ride spread axles.

Flatbed

Flatbed, steel

Pitts Platform 48 ft steel flatbeds with air ride and 22.5 in wheel ends.

Dovetail

Equipment trailer, dovetail

Pitts Equipment dovetail trailers in 7 and 8 ton bumper pull versions and a 15 ton gooseneck (TE15G). Flat deck with a beavertail and ramp off the rear.

  • TE77 ton, 16 ft deck
  • TE88 ton, 16 ft deck
  • TE15G15 ton, 25 ft deck

Dump Trailer

Equipment dump trailer

Pitts Equipment dump trailers in 7 and 8 ton sizes, with high wall (TDH) or low wall (TDL) bodies and a 14 ft deck.

  • TDH77 ton, 14 ft deck
  • TDH88 ton, 14 ft deck
  • TDL77 ton, 14 ft deck
  • TDL88 ton, 14 ft deck

Partial Tilt

Equipment trailer, partial tilt

Pitts Equipment partial tilt trailers in 7 and 8 ton sizes, with a 4 ft stationary deck, a 16 ft tilt deck and a knife edge approach.

Read more

HD models have a heavy duty frame.

Pitts Chassis Trailers

Intermodal container chassis

Pitts Intermodal container chassis for 20 ft and 40 ft ISO containers, including combo and tridem chassis and the SB38 44 ft double drop chassis.

Dorsey Intermodal Chassis Trailers

Intermodal container chassis

The MP20 is a Dorsey 20 to 40 ft city combo intermodal chassis sold through Pitts.

  • MP2029 ft 10 in long

Factory order

Get a quote.

Tell us the Pitts model, deck and options you need. We quote it from the yard or order it from the factory, and deliver it nationwide.

The other factory lines