2027 Landoll 845-53
Est. $2,417/mo
8.75% APR, 72 mo, 10% down, before FET, on approved credit

Landoll dealerLandoll builds four trailer lines: detachable gooseneck lowboys from 27.5 to 60 tons, traveling axle tilt trailers, traveling tail trailers, and Loadoll carrier beds.
21 models, 5 to 60 ton. Some rated in lb.
Detachables are finished with a 400 degree bake powder coat over a shot-blasted steel surface, and Alertoll adds digital tire, scale and hydraulic monitoring.
Factory: Marysville, KS
Est. $2,417/mo
8.75% APR, 72 mo, 10% down, before FET, on approved credit
Est. $1,917/mo
8.75% APR, 72 mo, 10% down, before FET, on approved credit
Est. $1,611/mo
8.75% APR, 72 mo, 10% down, on approved credit
Removable Gooseneck (RGN)
Hydraulic detachable gooseneck lowboys from 27.5 to 60 tons.
The AG models carry full-width Apitong decks with aluminum slide-out side extensions for farm equipment. The construction models (835, 845-53, 850-XT, 855, 860) use swing-out outriggers, and the 850-XT adds an extendable frame.
| Model | Capacity | Deck | Key specs |
|---|---|---|---|
| 825-AG | 27.5 ton | 22' 10" to 29' 10" | 27.5 ton frame capacity; deck rating 50,000 lb in 16 ft |
| 835 | 35 ton | 23' 4" to 31' 4" | 35 ton frame capacity; deck rating 60,000 lb in 12 ft |
| 835-AG | 35 ton | 26' 9" to 31' 9" | 35 ton frame capacity; deck rating 60,000 lb in 12 ft |
| 840-AG | 40 ton | 29' 9" to 31' 9" | 40 ton capacity; deck rating 80,000 lb in 16 ft (60,000 lb in 12 ft) |
| 845-AG | 45 ton | 27 to 32 ft | 45 ton capacity; deck rating 90,000 lb in 16 ft, 70,000 lb in 12 ft |
| 845-53 (845F construction) | 45 ton | 32 ft | 45 ton class construction detach, 102 in wide |
| 850-XT | 50 ton | 19' 4" to 32' 4" | 50 ton capacity; deck rating 100,000 lb in 16 ft (48 or 53 ft closed) |
| 855 | 55 ton | 22' 4" to 26' 2" | 55 ton capacity; deck rating 110,000 lb in 12 ft |
| 860 | 60 ton | 20' 10" to 25' 2" | 60 ton capacity; deck rating 120,000 lb in 14 ft |
Gooseneck mounted, wet kit only. Planetary, dual speed, air release, 20K or 30K, from Warn, Braden or Ramsey.
Provision for a hydraulic flip, with plumbing to actuate the flip axle.
Bolt-on aluminum or steel/wood flip axle decks.
Electric over hydraulic full-width ramp at 8.5 degrees.
Electric over hydraulic full-width ramp at 15 degrees.
4-piece bus ramps with lockable storage and lift assist.
2-piece ramp set for the extension and tail.
Rear-mounted brackets with a hinged 18 x 84 in aluminum OVERSIZE LOAD sign.
11 HP Honda or 25 HP Kohler EFI hydraulic engine packages with cover.
25 HP Kohler engine package with cover, mounted on the gooseneck.
Available for the frame and for the gooseneck.
Traveling Axle (tilt)
Landoll's traveling axle tilt trailers run from single-axle container and specialty models to the 3-axle 455, rated 110,000 lb.
Most carry an Apitong hardwood deck and an upper deck hydraulic winch as standard.
| Model | Capacity | Key specs |
|---|---|---|
| 317 | 35 ton | 70,000 lb capacity; deck rating 50,000 lb in 10 ft |
| 318 | 50 ton | 100,000 lb capacity; deck rating 70,000 lb in 10 ft |
| 330-1 | 8 ton | 16,000 lb capacity; deck rating 10,000 lb in 10 ft |
| 343 | 5 ton | 10,000 lb capacity; deck rating 10,000 lb in 10 ft |
| 344 | 15,000 lb | 15,000 lb capacity; deck rating 15,000 lb in 20 ft |
| 345 | 25 ton | 50,000 lb capacity; deck rating 40,000 lb in 10 ft |
| 440 | 40 ton | 80,000 lb capacity; deck rating 50,000 lb in 10 ft |
| 455 | 55 ton | 110,000 lb capacity; deck rating 70,000 lb in 10 ft |
108 in (9 ft) or 120 in (10 ft) wide decks, Canadian RTAC compliant.
27 in aluminum pull-outs or swing-out outriggers.
24 in steel pull-out extensions or swing-out steel outriggers. Capacity not to exceed 50 percent of trailer capacity.
27 in aluminum pull-out extensions. Capacity not to exceed 50 percent of trailer capacity.
Set of 8 hydraulic kicker rollers.
Adds 2 ft to trailer length and 23.5 in to swing clearance.
Track on upper and lower deck, approach track guide, railroad ramp package with storage.
Axle spacing 50 in to 10 ft 1 in. On the 50CA and 53 ft models, 17.5 in wheels only.
5 ft hitch for a 1 ft tractor bed overhang, or 7 ft hitch for a 3 ft bed overhang.
Tilting safety latch for the 5 ft and 7 ft hitch.
Replaces the standard 45 degree slope on the 317 and 318, or the deck on the 330-1.
1/8 in steel tread plate in place of the standard wood deck.
Hutch 9700 spring suspension in place of the standard air ride.
20K Braden worm gear, or 2-speed air release planetary winches up to 30K from Warn.
Braden or Ramsey winches are available. Synthetic rope is available.
A 12,000 lb or 20,000 lb Braden front mount winch is optional.
20,000 lb Braden worm gear winch in place of the standard 12,000 lb.
12,000 lb continuous chain drive with container load bridle, chain connect and pusher.
15,000 lb planetary chain drive in place of the standard 12,000 lb chain drive.
20,000 lb Braden, Ramsey or Warn 2-speed planetary winch with air release.
6-function remote for tilt, travel and winch.
2 leg set, 62,000 lb capacity. 4 leg set, 124,000 lb capacity, on the 318 and 455.
Kohler EFI 25 HP gas hydraulic engine package with cover. Mounting depends on the model: upper deck, front or under deck. Under deck mounting on the 440 reduces swing clearance to 69 in.
2-position bulkhead and front extension.
Aluminum LED light bar with chain binder rack, and LED work lights.
48 x 102 in mesh steel bulkhead.
Aluminum LED light bar with chain binder rack, and LED work lights.
Accessory rack with LED work lights, and orange front ladders.
Toe board and side container guide panels.
Pin locks for 20, 40 and 45 ft containers on the 43 ft frame. The set includes a toe board.
Front, middle and rear pin locks on the 46 ft frame. The set includes a toe board.
Pin locks for 20 and 40 ft containers on the 39 ft frame. The set includes a toe board.
Bulkhead-mounted, trailer color or galvanized. Not compatible with light bar or strobes.
Traveling / Hydraulic Tail
Landoll's traveling tail trailers carry a folding tail that lifts 24,000 lb, with an air-operated 6 ft upper deck ramp.
The 930 is the 2-axle model and the 950 is the 3-axle model.
Winch upgrades; Wireless remote control; Bulkheads and front extension; Light bar and chain tray
Carrier (sliding bed)
Loadoll carrier beds mount on a truck frame and slide back on a single bed cylinder with dual lift cylinders.
The HD III is the 30,000 lb industrial carrier and the Chain Drive II (the factory calls it the Loadoll II, model CL 20) is the 20,000 lb container carrier.
Winch choices; Steel tread plate; Container skid plate; Toolboxes; Hot dip galvanized bed
Offered across the whole line.
White, black, yellow, blue, red, green, metallic gray or sapphire blue. Included.
22.5 in polished, machined or Dura-Brite outer aluminum wheels on detachables.
Air Weigh Quickload Plus or Loadmaxx Plus scales, Right Weigh digital scale. PSI tire inflation, Crossfire air equalizers.
Dexter air disc brakes, per axle.
4SEE Grote digital harness, Haldex roll over stability, tire pressure and temperature alerts. Air-Weigh iWeigh scale, hydraulic pressure and temperature sensors.
Factory order
Tell us the Landoll model, deck and options you need. We quote it from the yard or order it from the factory, and deliver it nationwide.