- Home
- Brands
- Kalyn Siebert
- KS-HSA-3A-55T-53
Kalyn Siebert KS-HSA-3A-55T-53
Hydraulic Sliding Axle, 55 ton, 41' 6" deck

- Capacity
- 55 ton
- Deck
- 41' 6"
- Weight
- About 22,665 lb
About this series
Hydraulic sliding axle trailers in 40 ton 2-axle and 55 ton 3-axle builds. The 48' and 50' models are California Legal.
Read more
The 53' models are the standard length.
Specs
- Capacity
- 55 ton
- Deck length
- 11' 6" upper deck, 41' 6" lower deck
- Overall length
- 53'
- Width
- 8' 6"
- Deck height
- 57-1/2 in loaded upper deck height at front, 37 in loaded lower deck height at rear
- Fifth wheel height
- 48 in loaded fifth wheel height
- Weight
- Estimated weight 22,665 lb (+/- 3%)
Also stated
- 55 tons (110,000 lb) distributed in 53'; 70,000 lb concentrated in 10'
- 7 degree load angle, 16 degree dump angle
Standard features
- 4-beam design: 130,000 psi flanges, 80,000 psi minimum yield web
- 14 in main rails, 15 in side rails
- 4 in Junior I-beam crossmembers on 9 in centers
- Full-width 1-3/8 in nominal Apitong flooring
- 4 x 18 in roller at the front of the lower deck; folding road side safety step
- 2 in kingpin, 18 in kingpin setting, 2-speed landing gear
- Slider: V-grooved self-centering center roller, 2 greasable side rollers per side
- 4 slide pads per side, flex track for air, electrical and hydraulic lines
- Hydraulics run off the tractor PTO: 15 GPM at 2,800 psi max
- Two 6 in lift cylinders, piggyback slide cylinder
- Controls in a lighted road side cabinet with aluminum door and stainless steel hinges
- 3 axles, OEM 5 in round, 25,000 lb nominal each, 50 in spreads
- Air ride with manual dump valve
- 12-1/4 x 7-1/2 in brakes with parking brakes, 4S2M ABS, automatic slack adjusters
- 8-stud hub-piloted steel hubs, cast drums, oil seals
- 235/70R17.5 tires on 6.75 x 17.5 hub-piloted disc wheels
- 6-function wireless remote
- 2 integrated front tool compartments plus a curb side rear cabinet
- 5/8 in double key hole chain slots on 36 in centers; reinforced rear approach plate
- 12V 7-way sealed harness, LED lights and side markers, rear strobe with toggle switch
- Shot blasted, custom paint over epoxy primer
- Heavy duty DOT bumper; black anti-spray mud flaps with the Kalyn Siebert logo
Factory literature
Factory videos
More in the Sliding Axle Series
- KS-HSA-2A-40T-4840 ton
- KS-HSA-2A-40T-5040 ton
- KS-HSA-2A-40T-5340 ton
- KS-HSA-3A-55T-4855 ton
- KS-HSA-3A-55T-5055 ton

