- Home
- Brands
- Kalyn Siebert
- KS-HRG-3-55T-DB
Kalyn Siebert KS-HRG-3-55T-DB
Hydraulic Removable Gooseneck Lowboy, 55 ton, 3 axles, 26' deck

Factory photo
Factory photo
- Capacity
- 55 ton
- Deck
- 26'
- Axles
- 3
- Weight
- About 21,850 lb
- Loaded deck height
- 20 in
About this series
Kalyn Siebert's Diamondback hydraulic detachable lowboys run from a 35 ton 2-axle to a 55 ton 3-axle. The 55 ton carries its rating in 12' of deck, sits at a 20 in loaded deck height, and is set up for a 4th axle inline or a 3+1 setup.
Specs
- Capacity
- 55 ton
- 55 tons in 12' of deck length
- Deck length
- 26'
- Overall length
- 53'
- Width
- 8' 6"
- Loaded deck height
- 20 in
- Fifth wheel height
- 49 in loaded fifth wheel height
- Ground clearance
- 6 in loaded ground clearance
- Axles
- 3 axles, 5 in round, 25,000 lb nominal each, 54-1/2 in spacing
- Capable of a 4th axle inline and a 3+1 setup
- Weight
- Estimated weight 21,850 lb (+/- 3%)
Also stated
- Two kingpin positions: 96 in and 108 in swing; 15 in kingpin setting, 2 in kingpin
Standard features
- Hydraulic detachable gooseneck with a 5-position adjustable neck
- Narrow neck with chain hanging provision
- Air-activated, self-locking gooseneck pin
- PTO powered: two main cylinders and one lift arm cylinder
- 4-beam design: 100,000 psi yield flanges, 80,000 psi minimum web
- Full depth cambered deck beams; I-beam crossmembers on about 24 in centers
- 2 in nominal Apitong decking with open center
- 13 pair swing-out outriggers plus 1 pair heavy-duty hook-on at the front
- Front flip ramps and a 4' expanded tool tray
- Bucket well: last 3 center crossmembers recessed; V-style boom trough
- Ridewell or equivalent air ride with oil seals; air lift on the rear axle
- 16-1/2 x 7 in air brakes, parking brakes on the center axle, automatic slack adjusters
- 10-stud hub-piloted hubs with cast drums
- 275/70R22.5 16-ply low profile tires on steel wheels
- Automatic or manual ride height control with dump valve and air gauge
- Rear lugs plus air and electrical connections for a spreader bar and flip axle
- 12V 7-way sealed harness, LED sealed beam lights, strobe package with rear toggle switch
- Epoxy primer and black polyurethane paint
- 2 pair flags and flag holders, KS mud flaps
- Oversize load sign brackets, red and white conspicuity tape
Factory literature
Factory videos
More in the Diamondback Series
- KS-HRG-2-35T-DB35 ton
- KS-HRG-2-40T-DB40 ton
- KS-HRG-3-50T-DB50 ton

